Designed
for use in the Bio-Pharmaceutical industry, the Everest Industries
high purity, sanitary centrifugal pumps are manufactured to ASME BPE
specification criteria. All product contact components on the S200
are machined from wrought <5% ferrite level, 316L stainless steel
and feature a 20 Ra product contact surface finish. Material heat
numbers are available on all product contact components.
Designed
for heavy-duty, high-efficiency applications, sanitary
centrifugal pumps provide exceptional corrosion
resistance. Impeller and shaft are one piece, which connects directly
to motor shaft; eliminating such problems as vibration, short bearing
life, high NPSH requirements, high seal maintenance, poor tolerance,
and adverse operating conditions.
The
versatile Series close-coupled sanitary centrifugal pump offers
strong performance and competitive price/value within the lower
spectrum of heavy-duty, centrifugal pump applications. Sanitary
centrifugal pumps can be installed in a series without fear of seal
failure from elevated inlet pressures, even with viscous products.
The
APV W+ pump series if based on a unique hydraulic design that ensures
maximum efficiency allows for the highest hygienic standards and
reduces noise and vibration. The W+ range consists of 16 standard
models with pressure and flow capacities to 217psi and up to
1,760gpm. A number of special versions are available, including the
Wi+ inducer pump for low NPSH applications and the Ws+ self priming
unit designed to handle CIP return and other fluids with entrained
air and foam.
An
Inducer is an axial flow impeller with blades that wrap in a helix
around a central hub. The inducer rotates in a close-fitting housing
to provide a "booster" effect in front of the main
impeller.
The
inducer pump is the alternative to changing the process design when
NPSH availability is low. The inducer boosts the inlet pressure, and
the risk of cavitations is correspondingly reduced (the NPSH required
typically drops by 50-70%). When the risk of cavitations disappears,
so does the risk of a large number of operational disturbances that
would otherwise result - such as excessive noise, energy loss,
product damage and unnecessary wear on the pump. Low suction head is
a common "problem" in miscellaneous applications, e.g. when
pumping products with low boiling points or in processes that involve
vacuums.
The
Wi+ is unique among inducer pumps, since the NPSH requirement is kept
to a minimum throughout its entire operating range. The inducer
further enables the Wi+ pump to handle viscous or gaseous products
beyond the range of other centrifugal
pumps.
The
self-priming Ws+ is designed to handle CIP return and other fluids
with entrained air and foam. The unique design reduces the energy
consumption and noise of traditional liquid ring pumps by using a
high efficiency impeller that can be trimmed to match a specific
duty. The Ws+ employs a built in eccentric air screw to form the
liquid ring required for its self-priming capability.
About
Us :
Everest
Industries is a leading Centrifugal
Pump and Plate Lifting Clamp supplier
and manufacturer
in Ahmedabad, Gujarat, India. Centrifugal pumps are a sub-class of
dynamic axisymmetric work-absorbing turbomachinery.
Contact
Detail :
Telephone:
+9179-22902552
E-mail:
everestind2552@yahoo.co.in
FAX:
+91-9427710684
For
more information, please visit Everest Industries Website
everestindustries.co.in
No comments:
Post a Comment